Home / Information
Information
-
Problems and Solutions for High-Frequency and Multilayer PCB
Date:08/05/2020 View: 6 Problems of High-Frequency and High-Speed Multilayer PCB Production and Their Solutions Recent years have been witnessing improvement in electronic information technology and increasingly higher demands from people on their... -
How can I choose the aluminum plate for the PCB printed circuit
Date:07/03/2020 View: 28 Aluminum plate is a metal base copper clad laminate with the following characteristics such as terrific thermal conductivity, machining property and gas-electric insulation performance. Generally, there... -
4 Main Types of Plating Methods in PCB production
Date:06/19/2020 View: 49 There are four main types of plating methods in PCB (Printed Circuit Board) production: finger-plated plating, through-hole plating, reel linkage selective plating and brushing plating. ... -
Metal Core PCB Challenges
Date:05/23/2020 View: 53 Below are some of the critical challenges that a fabricator will face when manufacturing metal core PCBs. These are the most consistently documented issues over years of experience affecting the ability to efficiently and... -
Applications of Metal Core PCB
Date:05/15/2020 View: 71 In this section, we will take a look at some of the applications of MCPB. Military and Aerospace · The PCBs in military and aerospace applications must withstand extreme temperatures, thermal cycling, and... -
4 Advantages and 8 Applications of Aluminum PCB
Date:05/06/2020 View: 69 Stack-layer of Singe Aluminum PCB It features a thermal clad layer that dissipates heat in a highly efficient manner, while cooling components and increasing the overall performance of the... -
Metal Core PCB vs. Standard PCB
Date:04/17/2020 View: 69 1.Conductivity Standard PCB has a low thermal conductivity that is around 0.3W. Whereas MCPCB has a higher thermal conductivity which ranges from 1-2W. 2.Plated Through Holes In standard PCBs, we often have to... -
How is Aluminum PCB Made?
Date:04/09/2020 View: 85 Aluminum printed circuit boards consist of metal-based seals covered by copper foil circuit layers. They are made of alloy plates that are a combination of magnesium, aluminum and silumin (Al-Mg-Si). Aluminum PCBs deliver... -
ENEPIG: The Process suitable for gold bonding
Date:03/26/2020 View: 97 Electroless nickel/electroless palladium/immersion gold (ENEPIG) is sometimes referred to as the universal finish, because of the versatility of its applications. It is a multifunctional surface finish, applicable to... -
Why use MCPCB in led industry?
Date:03/20/2020 View: 130 There are several reasons why MCPCB is ideal for led industry. The first and foremost is that MCPCB specifications include an ability to integrate dielectric polymer layer. Moreover, this provides significantly higher thermal...
